+90 352 311 50 01 Whatsapp +90 532 383 88 49

Proportional Spray Foam and Polyurea Machine

H-KPX 30
Proporti̇onal Polyurethane and Polyurea Spray Machine

Equipment Included in Machine Set

SP2 Spray Gun
SP2 Spray Gun
Spray Gun Maintenance Kit
Spray Gun Maintenance Kit
Heated Hose (63 mt)
Heated Hose (63 mt)
Transfer Pump (Pol)
Transfer Pump (Pol)
Transfer Pump (Iso)
Transfer Pump (Iso)
Mositure Barrier Kit
Mositure Barrier Kit
Consumables
Consumables

-Extraordinary reactor fo your need of variable ratio spray
-Excellent balance control
-Sensitive heat and pressure control
-Faultless raw material measurement
-Instant monitoring and reporting

 

Characteristics
Pusmak’s hydraulically driven KPX 30 proportioning machine is engineered and manufactured to fulfill the needs of polyurea elastomers, spray foam and many other different ratio proportional coating materials. With its mechanical proportioning system, Kpx 30 assures contractors with a very well-proportioned mixture of two components. The proportioning is also supported by specially designed mixing chambers according to the needs. The machine is equipped with the entire necessary technical features for all types of coating and insulation materials including non-flammable polyurethane foams.

Pre-Heater System  

The pre-heater system of Kpx 30 is equipped with two different heating blocks for each component. Each block consists of 4 electrical resistances of 1500 Watts which makes at a total heating power of 6000 W for each component. Consisting of a total power of 12000 W, the pre-heating system fulfills the necessities of a balanced heating need for polyuria elastomers and spray foam application.

Hose Heating System
Pusmak’s KPX 30 different ratio proportioning machine’s heating system is manufactured with transformer of 4000 W which allows using of copper wired heated hose system.  Copper wired heated hoses supply a very homogenous heating all through the heated hose.

Control Panel
The simple and useful electrical and electronical design of machine makes it easy for user to check everything easily. Moreover, specially designed phase control and correction system prevents the costly repairs resulting from misconnection to electricity plugs. PLC screen on the control panel allows user to control everything quickly and easily. The specially coded software inside enables user to choose language options, limit the cycle to be shut, follow the total working hours, activate compressor if connected through machine, control pressure tolerance limit and check the error history for diagnosing any potential problems. Pusmak pays a special interest on using high quality materials for all the electronic parts used in the system.

Proportioning Unit
Proportioning unit is a kind mechanical proportioning unit with capacity of proportioning from 1:1 to 1:2,5. The two mechanical vertical pumps enable different proportioning for two components materials of polyurethane foam, polyurea elastomers, Pır, Conipur and many others.  The hydraulic power source behind the unit drives the the two pumps from a center point of two pumps. Proportioning of different ratios is supported by the mixing chamber design for special needs.

 

Spesifications of Pusmak Kpx 30 Proportional Pır, Conipur, Polyurea and Spray Foam Machine

Maximum Fluid Pressure

240 Bar

24 Mpa

3480 Psi

Voltage Phase  (VAC 50/60 Hz)

400 3Ø∆

400 3Ø∆

400 3Ø∆

Performance per minute

5.70 kg

12.54 lbs

 

Amount of raw MAterial per  Cycle

0,200 kg

0.44 lbs

 

Maximum Hose Length

90 mt

295 ft

 

Pre-Heater Power

10400 watt

 

 

Hose Heater Power

7000 watt

 

 

Weight

295 kg

649 lbs

 

Total Power

22000 watt

 

 

 

Dimentions

Height

Width

Length

132 cm

104 cm

65 cm

GENSET AND COMPRESSOR ENTEGRATED SPRAY MACHINES

GENSET AND COMPRESSOR ENTEGRATED SPRAY MACHINES

 

Maximum working pressure (Bar, Mpa, Psi)

240

24

3481

Voltage phase (VAC 50/60 Hz)

400 3Ø∆

400 3Ø∆

400 3Ø∆

Maximum spray performance

(lt/dak,g/dak)

5.7

1.5

-

Liters of raw material per cycle (A+B)  (lt/gal)

0,147

0,0376

-

Maximum hose length. (m,ft)

94

310

-

Pre-heater power (Watt)

10000

-

-

Weight  (Kg)

1270

-

-

Total Power (watt)

26000

 

 

Dimensions (cm)

Heigth

        Width

Length

172

103

194

Engine 

Diesel

-

-

Max.  Power (kw,kVA)

32.80 kw

41 kVA

-

Frequency (HZ)

50

 

-

Consumption at %100 power (lt/hour)

8.7

-

Consumption at %75 power (lt/hour)

6.5

           

-

Consumption at %50 power (lt/hour)

3.4

-

Oil capacity (lt)

8,5

-

Fuel tank capacity ( lt )

82

-

* Specialities of genset entegrated KPX 20 machines.

×
TR EN AR
{ "data":[{"event_name":"ViewContent","event_time":1624006418,"action_source":"website","event_source_url":"https://www.pusmak.com/en/product/proportional-spray-foam-and-polyurea-machine","user_data":{"client_ip_address":"34.236.187.155","client_user_agent":"CCBot/2.0 (https://commoncrawl.org/faq/)"}}],"test_event_code":"TEST39059"}